DPG is a comprehensive underwater photography website and community for underwater photographers. Learn underwater photography techniques for popular digital cameras and specialized professional underwater equipment (wide angle, macro, super macro, lighting and work flow). Read latest news, explore travel destinations for underwater photography. Galleries of professional and amateur underwater photography including wrecks, coral reefs, undersea creatures, fashion and surfing photography.
Dive Photo Guide
No Photo


United States
Years Shooting:Edit
18 years




Destinations I've DivedAdd
Destinations I want to DiveAdd
# of Dive Trips Per Year
0 trips per yearEdit
Cone crushers aren't the latest technology in the machinery sector. They were created more than a century ago to aid in secondary, tertiary and even quaternary reduction of materials. Like other crushers for compression, cone crushers also have a crushing cavity or chamber where the rock is crushed to the size that is minimal. The crushing chamber of the cone crusher is actually the space made between the concaves and mantle. These items are protected against regular wear by the replacement manganese liner. If you are interested in purchasing crusher wear parts then Qimingcasting is one of the most reliable sources. Whenever you wish for a useful source on crusher wear parts, check over here.

The selection of the most efficient cone crusher liner

There are many options for liners to hold coarse and fine feeds. But, the choice of lining will depend on what you consider. The feed is the most important element in deciding on the proper cone crusher liner. You must contain the top graded feed going into the existing crushing chamber. This feed with the highest grade is commonly considered as,
Closed side setting Closed side setting: between 0 and 10 percent
The midpoint is between 40-60 percent.
Closed side feed opening passes between 90% and 100%. A few people are looking at approximately 80 percent of the open side and choose the smaller of two.
Users need to match the full grade of the feed not just its size so you can use the whole chamber. It is vital to use the entire crushing chamber as is possible to attain the desired throughout and required amount of reduction. Most wear on the liners of the crusher takes place before the parallel zone, but this wear might be highlights if the feed is very tiny. Also, you could develop an opening in the parallel zone that is too quickly. Additionally, if the size of the feed is small and the feed material is too coarse, the feed will continue to penetrating through its opening and will cause the top of the liners to fall off quickly. Due to this feed opening is obstructed which means that throughput will be reduced and there is a decreased production. The output shade will be more coarse and the product would be slanting, not cubical. The volume limit will not be exceeded at the power draw that is lowest if you consider the limit on volume.

What is the importance of liner selection?
The selection of the cone crusher's liner is essential for it to perform properly and consistently. It is essential to choose the appropriate cone crusher liner for your equipment to ensure it is running efficiently and selling effectively. A liner that is properly selected will give more amounts of benefits to the overall performance of your cone crusher. When choosing the cone crusher liner shredder wear parts it is significant to notice that it should be fitted with the ideal discharge setting that matches your required closed side settings for the product you create. This will make sure that the liner lasts longer. A good liner will guarantee that the amp draw is steady and decreases the possibility of your cone crusher being damaged by bounce.

After you have learned how to select the appropriate cone crusher liner it's essential to know when to change them. Liners that are longer than their intended operating life could cause mechanical issues for the cone crusher's equipment. The liners which are stretched more will crack and expand. The bending caused by cracks or thin mantle will result in some severe seat surface damage. There are two indicators that it is time to replace the cone crusher's liner.

Manufacturing level
When you notice the 10% or more drop in the production rate It is the best indication to change the cone's liners. crusher.
Liner thickness
You may want to consider replacing the liner in case it is not evenly worn in the entire chamber. Some cone crushers come with an automatic liner change reminder. To avoid hassles, you can set up the automatic reminder in the existing cone crusher to allow for convenience.

What I look for in a Dive Operator:


No galleries found.

Travel with us