DPG is a comprehensive underwater photography website and community for underwater photographers. Learn underwater photography techniques for popular digital cameras and specialized professional underwater equipment (wide angle, macro, super macro, lighting and work flow). Read latest news, explore travel destinations for underwater photography. Galleries of professional and amateur underwater photography including wrecks, coral reefs, undersea creatures, fashion and surfing photography.
Dive Photo Guide

Articles

Review: i-Torch Video Pro7 Light
By Sascha Janson, June 3, 2014 @ 02:00 AM (EST)


The new i-Torch Video Pro7 light packs serious functionality into a very compact double O-ring sealed aluminum body. At the time of writing, it is the smallest and lightest 5,000-lumen LED underwater light on the market. There are five power settings for white light (100%, 80%, 60%, 40%, and 20%) as well as two power settings for red light (100% and 50%)—ideal for shooting shy subjects. There’s also an SOS mode.
 


A single mode button caters to the light’s various functions. Holding the button down for one second powers the light on at the default 100% white light. By pressing the button again, you can cycle through the following modes: 80% white, 60% white, 40% white, 20% white, 100% red, 50% red, and back to 100% white. Pressing the button for two seconds turns the light off. Holding the button down for three seconds (when the light is turned off) activates the SOS mode. Press it again and you’re back to 100% white. At 5,000 lumens, the Video Pro7’s maximum output rating is impressive, and it boasts a very even 120-degree beam angle (with no hotspots at all), which is excellent for shooting video.
 


Power comes from a supplied 50Whr rechargeable lithium battery. To charge the Video Pro7, you simply open the unit and connect the charger. The green light on the charger switches to red, indicating that charging is in progress; the indicator light switches back to green once the battery is fully charged. A completely empty battery takes about two-and-a-half hours to charge. Obviously, it’s a good idea to buy a spare battery (MSRP $270), so that you’re able to switch batteries between dives.

You can get a good idea of the amount of juice left in your battery from the indicator light ring that surrounds the mode button. This indicator glows green when the battery level is between 70% and 100%, yellow from 40% to 70%, red between 15% and 40%, and flashing red when the level is 15% and below.


Specifications

  • LED: 8x XML2, 2x XPG red
  • Brightness: 5,000 lumens
  • Beam angle: 120 degrees
  • Modes: Eight (5 levels of white, 2 levels of red, SOS)
  • Switch: Push button with battery indicator
  • Construction: Aluminum body and head 
  • Burn time: 60 minutes at highest setting
  • Size: 60mm diameter x 127mm length 
  • Weight: 506g (including battery) 
  • What’s included: 50Whr battery, battery charger, YS mount
  • MSRP: $1050


Preparing the Video Pro7

Getting the Video Pro7 ready for action is very easy. Firstly, charge the battery before using it for the first time by unscrewing the back of the aluminum body and plugging in the charger cable. When it’s fully charged (charger light goes green), check the O-rings for dirt and hairs and screw the light back together. For my test dives, I used two lights, adding ball mounts to each of the YS mounts and attaching the lights to my camera.
 


The Video Pro7 in Use

Switching on for the first time underwater, I found that the Video Pro7 gave a very even light well-suited for shooting video as well as still images. The color of the light is a little cooler than that from a Sola, but it’s not too cold. The impressive output of the light was immediately noticeable. In fact, when shooting macro I sometimes found myself using a smaller aperture because it was brighter than I needed!

Great for shooting video, the light also proved to be very good for shooting still images. Below are a few of the stills I took while diving with the Video Pro7.
 

Flamboyant cuttlefish (Metasepia pfefferi) male (about 3cm). Canon 7D, Canon 60mm Macro USM, SubSee+10, 2x i-Torch Video Pro7. f/5.6, 1/640s, ISO160
 

Flamboyant cuttlefish just hatched (about 7mm). Canon 7D, Canon 60mm Macro USM, SubSee+10, 2x i-Torch Video Pro7. f/11, 1/160s, ISO160
 

Ornate ghost pipefish (Solenostomus paradoxus) (about 12cm). Canon 7D, Canon 60mm Macro USM, 2x i-Torch Video Pro7. f/5.6, 1/800s, ISO160
 

Phyllodesmium magnum (about 7cm). Canon 7D, Canon 60mm Macro USM, 2x i-Torch Video Pro7. f/5.6, 1/1000s, ISO160
 

Mimic octopus (Thaumoctopus mimicus) (mantle length about 10cm). Canon 7D, Canon 60mm Macro USM, 2x i-Torch Video Pro7. f/11, 1/125s, ISO160


As well as testing the Video Pro7’s prowess in capturing macro video, I also put the light through its paces with a fisheye lens and shooting wide-angle—and even here I was very pleased with the results.

The video below contains some sample footage shot with a Canon 7D with a Canon 60mm macro lens and 1x SubSee+10, and with a Tokina 10–17mm zoom fisheye and a 1.4x teleconverter, in a Subal housing and dual i-Torch Pro7.
 



Final Thoughts

The Video Pro7 is an exceptionally small and powerful video light that performs very well for a light in this price range. If you’re in the market for a compact and affordable photo/video light equipped with a hefty output, I would highly recommend the i-Torch Video Pro7.

 

For more information about the i-Torch Video Pro7 and related products, visit www.i-divesite.com.

RELATED ARTICLES

Be the first to add a comment to this article.
You must be logged in to comment.
Sponsor
Newsletter
* indicates required
Travel with us

Featured Photographer




Sponsors