DPG is a comprehensive underwater photography website and community for underwater photographers. Learn underwater photography techniques for popular digital cameras and specialized professional underwater equipment (wide angle, macro, super macro, lighting and work flow). Read latest news, explore travel destinations for underwater photography. Galleries of professional and amateur underwater photography including wrecks, coral reefs, undersea creatures, fashion and surfing photography.
Dive Photo Guide


Easydive Shipping Carbonarm Housing for GoPro HERO8
By Ian Bongso-Seldrup, December 10, 2019 @ 09:00 AM (EST)

Italian company Easydive is now shipping the new Carbonarm housing for the latest GoPro HERO8. Like the Carbonarm housing for the HERO5, HERO6 and HERO7, the new housing is made from aluminum, features a double O-ring seal, and is depth-rated to 250 meters (820 feet). The housing can be fitted with an optional external battery pack, vacuum system, video output, and wired remote control.

Priced at €318.85 (excluding tax), the Carbonarm housing for the GoPro HERO8 can be ordered now.


GoPro HERO8 Case

MADE IN ITALY Anticorodal aluminum Case for HERO8, the latest camera of the GoPro HERO series. 100% Made in Italy, produced by Carbonarm, guaranteed down to 250 meters. It has double O-ring seals: Striker and radial, and is prepared for an external battery pack, vacuum system, video output, and remote control. Double thread for M6 screws or 1/4 Kodak tripod mounts.


Housing made in aluminum, anodized with 50 micron military treatment to guarantee maximum resistance against wear and salt over time.

  • This case is shaped according to the new GoPro HERO8.
  • All the controls are shown externally with extreme precision.
  • The side hinge allows it to be opened and closed very easily.


  • Presence of a double O-ring seal, a zinc for protection against galvanic currents, and a predisposition cap for external battery pack, vacuum system, video output and remote control.
  • Arrangement for Filter Accessories and Additional Lenses.
  • On the upper part there is a threaded blind hole M6 with locking pin, this allows you to implement any accessories or insert an SF / M6 ball that will allow you to add any accessory light.
  • In the lower part the case is equipped with 5 threaded holes, 2 with metric pitch M6, 2 with Kodak pitch 1/4, which allows you to easily fix the case to a possible tilt bracket. There is a central Kodak pitch hole 1/4.
  • 2 Year Warranty.

Technical Specifications


  • Length 113 mm
  • Width 66 mm
  • Thickness 55 mm


  • Mechanical buttons

Weight and Depth:

  • Weight on surface: 360 g
  • Weight in sea water: 200 g
  • Depth: max 250 meters



Isotta Housing for OM System OM-1 I & II
SeaLife SportDiver Smartphone Housing
Nauticam Fisheye Conversion Port (FCP)
Ikelite RC1 TTL Receiver for AOI and Backscatter Octo Housings
Be the first to add a comment to this article.
You must be logged in to comment.
Support Our Sponsors
Travel with us

Featured Photographer

Follow Us