Firmware Updates For Two Nikon SLRS
Nikon D3
About this firmware update
This service provides software for upgrading D3 firmware to v2.01.
When performing this firmware upgrade, be sure to upgrade both A and B
firmware. Be aware that operation of your D3 is not guaranteed if either A or B
firmware is upgraded while the other firmware is not upgraded.
The following improvements have been made in version 2.01
- Geodetic information is
now displayed in ViewNX Ver. 1.2.0 or later and Capture NX 2 Ver. 2.1.0 or
later for images captured with the GPS Unit GP-1 mounted on the camera.
- Autofocus-response performance in focus mode C (Continuous-servo AF mode)
with relatively dark subjects has been increased.
- When the AF-ON button is pressed, the monitor turns off and a focus point can
now be selected using the multi selector.
- Photo information
displayed in full-frame playback has been modified as follows:
HI-, LO-
has been changed to Hi, Lo
WARM TONE has been changed to WARM
FILTER
COLOR CUSTOM has been changed to COLOR
BALANCE
- Manamah,
displayed in the Time zone options
for the World time item in the setup menu, has been
changed to Manama.
- An issue that, in extremely rare cases, resulted in noticeable black dots in
images captured with Long exp. NR
in the shooting menu set to On has been
resolved.
- When the Speedlight SB-800 was mounted on the camera with flash mode set to
Distance-priority manual (GN) mode, and then the exposure meters were
reactivated or the camera was turned on, the distance information displayed on
the SB-800 changed. This issue has been resolved.
- An issue that, in some rare cases, caused images captured with the following
lenses to be under-exposed, has been resolved.
AF-S VR Micro-Nikkor 105mm f/2.8G IF-ED
AF VR Zoom-Nikkor 80-400mm f/4.5-5.6D ED (5.0x)
Windows link
Mac Link
Nikon D700
About this firmware update
This service provides software for upgrading D700 firmware to v1.01.
The following improvements have been made in version 1.01
- When Custom Setting a4 Focus tracking
with lock-on
was set to Off in Continuous-servo
AF, the lens drive moved gradually without achieving focus. This issue
has been resolved.
- When the Speedlight SB-800 was mounted on the camera with flash mode set to Distance-priority
manual (GN) mode, and then the exposure meters were reactivated or the camera
was turned on, the distance information displayed on the SB-800 changed.
This issue has been resolved.
- When the Multi-Power Battery Pack MB-D10 was mounted on the camera and an
EN-EL3e battery inserted in the camera but no batteries inserted in the MB-D10,
and SB-900 flash mode set to TTL auto flash mode, the flash mode changed to A mode when the
exposure meters turned off or were reactivated, or the camera was turned off or
on. This issue has been resolved. (This issue has also been
resolved with SB-900 firmware Ver. 5.02.)
- An issue that, in extremely rare cases, resulted in noticeable black dots in
images captured with Long
exp.
NR in the shooting menu
set to On has been resolved.
- Manamah, displayed in the Time zone options for the World time item in the setup
menu, has been changed to Manama.
Windows
Mac
